Warmup 3IE Operating Manual - page 2
3iE Operating Guide V4 © Warmup plc - 2013
SETTING YOUR HEATING PROGRAM
Press “menu”, then Press “set program”
Press the programming option that suits your needs.
• “set each day separately”: sets each day of the week with a different
program
• “set weekday and weekend” : sets a program for Monday – Friday
and a different program for Saturday and Sunday
• “set all days the same”: one program is set for all the days of the
week
• “set fixed temperature”: set a single temperature to be held
constantly
• “select a pre-set” see explanation in pre-set programs table
Press “up” or “down” to set the start time for the first of the day.
Note: if you hold a button for several seconds it will scroll continuously until
you release your finger.
To change the target floor temperature, press “floor temp”, you can now press
“up” and “down” to change the target floor temperature.
Note: If you would rather use your thermostat to target an air
temperature, please read the “SETTINGS” section of this document.
If you want the target temperature to change later on in the day then press
“add another period”. You can add up to 10 periods in each day.
Note: It is recommended that you finish your daily program on a low target
temperature so that you save energy overnight.
Note: If you do not need the heating to protect against frost, then you
can scroll down to the bottom of the temperature range to set the target
temperature to “OFF”. With this setting, the heating will not come on
regardless of the temperature.
Once you have set all the desired periods in the day press “done” to go to the
summary page.
This summary page allows you to see the program you have set for this day. If
you need to change something press “edit”. This will take you back to the first
period of the day. Remember that you will need to add all the periods again.
If you are happy with the program and would like to set the same program for the following day press “copy to day”
If you are happy with the program but would like to set a different program for the following day press “OK”
If you would like to return to the preceding day press “back”.
When you have set a program for all the days including Sunday (or Weekend in the case of Weekday/ Weekend) then
pressing “OK” will enter the schedule and return you to the home screen.
Note: The set temperature for the time before the first period of the day comes from the night before.
THERMOSTAT MENU SYSTEM
By accessing the main menu you can program your thermostat or make any changes to the settings.
To access the menu press “menu” on the main screen. If the thermostat is in sleep mode, press ”wake”.