Warmup 3IE Operating Manual - page 5
3iE Operating Guide V4 © Warmup plc - 2013
Hint: if you are interested in seeing how much energy you can save by
adjusting the settings of your thermostat, simply alter your heating
program and wait a few days before comparing the daily energy used before
and after you changed your program.
To view the estimated cost of your energy usage, you will need to set the cost
parameters in “energy settings”. The cost estimate will only be
accurate for the time period AFTER you set the heating costs.
• “single energy tariff” means that you have a single cost of electricity all day
long
• “standard / low energy tariff” means that you have a discounted cost of
electricity during part of the day.
Select the appropriate structure that applies to your electricity tariff plan
For both the standard and low energy tariff you will need to set a cost per
Kilowatt hour (KWH). First set the relevant currency by pressing “up” and “down”
(you can select £, $, € and Y). Press “ok” to proceed to the first digit of the
energy tariff, press “up” and “down” to select the correct amount and then press
“ok” to proceed to the second digit. Continue pressing “ok” until you have set all
the digits and returned to the ENERGY MONITOR main page.
Hint: If your energy cost is 11.6 pence per KWH then you will need to set your
cost per KWH to £0.116
If you are setting a “standard/ low energy tariff” you will also need to set the
time of day at which the low energy tariff starts and stops and the cost per
KWH during the low tariff period.
After all these parameters are set you can view the cost of the energy used
by your underfloor heating system in “view cost estimate”. If you are using
“standard / low energy tariff” then the amount/ cost of energy used in the
standard period will be displayed in red and the amount/ cost used in the low
period will be displayed in white.
SETTINGS
Your 3IE is a very flexible device and be configured in many different ways to
meet your requirements.
Functions that can be accessed in the “settings” menu include:
“time”
• Set time and date
• Set time format preference (12Hr clock or 24Hr clock) and date format
preference (MM/DD/YYYY or DD/MM/YYYY)
• Turn on automatic day-light savings for your region
“language”
• Select the language of operations
“temperature preferences”
• Select temperature unit preference (°C or °F)
“display / audio”
• Choose home screen theme and set screen brightness
• Turn on/ off heating LED and audio feedback
• Turn on/ off child lock (details below)
“set heating target”
• Select if your thermostat uses floor temperature sensor or air
temperature sensor for thermal regulation (details below)