Warner RF FMT-150A User Manual - page 5
FMT-XXX (Ver. 2.1) User Manual
----------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
4
(Fig. 6)
(2) Press the adjusting knob again to set frequency.
(Fig. 7)
(3) By turning the adjusting knob left or right to decrease or increase frequency, the step is 100KHZ.
Frequency can be set from 87.5MHZ-108MHZ (Specified frequency can be customized, please contact
us for details).
(4) Press the adjusting knob to confirm when you determine to use a certain frequency.
2. Audio Volume
(1) Press and turn the adjusting knob to enter into audio volume configuration menu.
(Fig. 8)
(2) Press the adjusting knob again to set volume.
(Fig. 9)
(3) By turning the adjusting knob left or right to decrease or increase volume, the step is 1. Volume
can be set from 0~79.
(4)
Press the adjusting knob to confirm.
3. RF Power Set
(1) P
ress and turn the adjusting knob to enter into RF output power configuration menu.
(Fig. 10)
(2) Press the adjusting knob again to set output power.
(Fig. 11)
(3) By turning the adjusting knob left or right to decrease or increase output power, the step is 1watt
(0.1 watt for FMT-30A). Power can be set from 0 to 30/50/80/150/300 watts, based on your purchase.
(4)
Press the adjusting knob to confirm.
Memo
: DET - power detected
SET
–
output power set
Only output power can be set.
4. Stereo or Mono