Warpia StreamHD Quick Start Manual

Manual is about: Wireless PC to TV Display Adapter

Page of 4

Download

Bookmark us

1. SOFTWARE INSTALLATION:

Prior to installing the Warpia StreamHD software it is important to make sure there

is no prior installation of Wireless USB or Display Link software from Warpia or

other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL

CAUSE THE STREAMHD SOFTWARE NOT TO WORK PROPERLY

If you see either Wireless USB or Display Link programs, first uninstall them by

going to the Control Panel- Programs and Features section and clicking on the

Uninstall tab.

StreamHD – SWP120A

Rev B

Quickstart Guide

5. CONFIGURING AUDIO SETTINGS:

The PC should automatically connect via the StreamHD to the Wireless audio device.

If it does not, or if you would like to switch audio devices, you can select the Audio

Playback device from the drop down dialog in Windows

7 as follows:

Right click the Audio Properties icon in the System Tray and select Playback

devices.

For full details of installations procedures and troubleshooting for all Windows

Operating Systems, refer to the installation manual available on the installation CD,

or online at www.warpia.com/support

To Contact Support: support@warpia.com

For all audio outputs (HDMI, 3.5mm or S/PDIF)

Click “Speakers USB PnP Sound Device” and click “Set Default”

Click “Speakers USB PnP Sound Device

Next, Insert the StreamHD installation CD into the PC and begin the software

installation by running the Setup.exe file. Ensure that the PC Adapter is NOT

plugged into the PC at this time.

Page 1
1. Software installation: prior to installing the warpia streamhd software it is important to make sure there is no prior installation of wireless usb or display link software from warpia or other companies. If you have this software in your system, this will cause the streamhd software not to work ...
Page 2
2. Hardware installation: after the software has been installed, insert pc adapter into an available usb port. 3. Establishing initial wireless connection with tv/monitor/projector: plug the receiver base into an electrical outlet using the power cord provided. Connect the receiver base to the tv/mo...
Page 3
2. Hardware installation: after the software has been installed, insert pc adapter into an available usb port. 3. Establishing initial wireless connection with tv/monitor/projector: plug the receiver base into an electrical outlet using the power cord provided. Connect the receiver base to the tv/mo...
Page 4: Streamhd – Swp120A
1. Software installation: prior to installing the warpia streamhd software it is important to make sure there is no prior installation of wireless usb or display link software from warpia or other companies. If you have this software in your system, this will cause the streamhd software not to work ...