Wasco DC 16 K Manual - First Use

25 EN

qualified electrician.

B

If the product is faulty, it must not be operated unless 

it is repaired! There is the risk of electric shock!

First use

•  To have the product ready for operation before 

calling the authorised service agent, make sure 

that its location and power supply installations are 

appropriate. If they are not, call a qualified electrician 

to have any necessary arrangements carried out.

•  Make sure that the power connections of the product 

are in accordance with the instructions given in 

relevant chapters of this manual. 

Disposing of packaging material

Packaging materials are dangerous to children. Keep 

packaging materials in a safe place out of reach of 

children. Packaging materials of your product are 

manufactured from recyclable materials. Sort and 

dispose of them in accordance with recycled waste 

instructions. Do not dispose of them with normal 

domestic waste.

Transportation of the machine

1.  Unplug the machine from the mains.

2.  Remove the water drain (if any) and chimney 

connections.

3.  Drain water remained in the machine completely 

before transportation.

Disposing of the old machine

Dispose of your old machine in an environmentally 

friendly manner.

Refer to your local dealer or solid waste collection centre 

in your area to learn how to dispose of your machine.

Before disposing of your old machine, cut off the power 

cable plug and make the loading door lock unusable to 

avoid dangerous conditions to children.

1. Remove the hose on the machine by pulling it out from 

its end.  Do not use any tools to take out the hose. 

2. Connect the special drain hose supplied with the 

machine to the pipe fitting.

3. The other end of the drain hose can be directly 

connected to the wastewater drain or to the 

washbasin. The fitting must always be secured in all 

types of connections. Your house may be flooded if the 

hose gets out of its housing during water discharge.

Important:

•   The hose should be attached to a height of maximum 

80 cm.

•   You must be careful not the pinch or bend the hose. 

•   The end of the hose should not be bent, it should not 

be stepped on and it must not be folded between the 

drain and the machine.

Adjusting the feet

In order to ensure that your machine operates more silently 

and vibration-free, it must stand level and balanced on its 

feet.  Balance the machine by adjusting the feet.

Rotate the feet to adjust until the machine stands level and 

firmly.

C

Never unscrew the adjustable feet from their housings.

Electrical connection

Connect the machine to a grounded outlet protected 

by a fuse of suitable capacity as stated in the technical 

specifications table. Our company shall not be liable for 

any damages that will arise when the machine is used on a 

circuit without grounding.

•  Connection must comply with national regulations.

•  If the current value of the fuse or breaker in the house 

is less than 16 Amps, have a qualified electrician 

install a 16 Amp fuse.

•  Power cable plug must be within easy reach after 

installation.

•  The voltage and allowed fuse or breaker protection are 

specified in the “Technical Specifications” section.

•  The specified voltage must be equal to your mains 

voltage.

•  Do not make connections via extension cables or 

multi-plugs.

•   The main fuse and switches must have a contact 

distance of minimum 3 mm.

B

Damaged power cable must only be replaced by a