Wasco DC 16 K Manual - Child-Proof Lock
33 EN
Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all buttons
except the “On/Off” button on the control panel are
deactivated when the child-proof lock is active.
Press the “Start/Pause/Cancel” and “Cancel audio
warning” buttons simultaneously for 3 seconds to activate
the child-press lock.
To start a new programme after the programme is over or
to interrupt the programme, the child-proof lock should
be deactivated. Press the same buttons for 3 sec. again
to deactivate the child-proof lock.
C
Child-proof lock is deactivated when the machine is
restarted by pressing the On/Off button.
C
Press the relevant buttons for 3 seconds to activate
the child-proof lock. A long beep will be heard and the
child-proof lock will be activated. A double beep will be
heard if you press any button or turn the programme
selection knob while the child-proof lock is active.
Press the buttons for 3 seconds to deactivate the
child-proof lock. Single beep will be heard and child-
proof lock will be deactivated.
A
A double beep will be heard if you turn the
programme selection knob when the machine is
running and the child-proof lock is active. If you
deactivate the child-proof lock without returning the
program selection knob to its previous position, the
programme will be terminated since the position of
the programme selection knob is changed. The drying
light turns on and the machine remains on hold until
a new programme is selected and the “Start/Pause/
Cancel” button is pressed.
Ending the programme through canceling
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3 seconds.
The “Filter cleaning”, “Water tank” and “End/ Anti-
creasing” warning lights will turn on at the end of this
period for reminding purposes.
A
As the inside of the dryer will be excessively hot
when you cancel the programme while the dryer is
running, activate the ventilation programme to cool it
down.
End of programme
The “End/Anti-creasing”, “Filter cleaning” and “Water
tank” warning lights on the programme follow up
indicator will turn on when the programme comes to an
end. The door can be opened and the machine becomes
ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C
Final step of the drying cycle (cooling step) is
performed without heat application in order to keep
the items at a temperature that would not harm them.
C
A 2-hour anti creasing programme to prevent laundry
from creasing will be activated if you do not take the
laundry out after the programme has come to an end.
C
If you will not take the laundry out immediately, do not
stop the dryer before the drying process is complete.
C
Clean the filter after each drying (please see, Filter
cleaning).
C
Drain the water tank after each drying (please see,
Water tank)