Wasco LS 1003 E User Manual - page 28
28/EN
Washing Machine / User’s Manual
4.12 Child Lock
Usechildlockfunctiontopreventchildrenfromtampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmes and the selected temperature, speed and
auxiliaryfunctions.
C
Evenifanotherprogrammeisselectedwiththe
ProgrammeSelectionknobwhiletheChildLockis
active,previouslyselectedprogrammewillcontinue
running.
C
When the Child Lock is active and the machine is
running,youcanswitchthemachinetoPausemode
withoutdeactivatingtheChildLockbyturningthe
ProgrammeSelectionknobtoOn/Offposition.When
youturntheProgrammeSelectionknobafterwards,the
programmewillresu
To activate the Child Lock:
Pressandhold1stand2ndAuxiliaryFunctionbuttonsfor
3seconds.Thelightsonthe1stand2ndAuxiliaryFunction
buttonswillflashwhileyoukeepthebuttonspressedfor3
seconds.
To deactivate the Child Lock:
Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3
secondswhileanyprogrammeisrunning.Thelightsonthe
1stand2ndAuxiliaryFunctionbuttonswillflashwhileyou
keep the buttons pressed for 3 seconds.
C
In addition to the method above, to deactivate the Child
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
Whenthepowerisrestoredafterapowerfailureorafter
your machine is unplugged and plugged in again, the
ChildLockwillnotbedeactivatedwhenthemachine
resumes operating.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
lightofthecompletedstepwillturnoff.
Youcanchangetheauxiliaryfunctions,speedand
temperaturesettingswithoutstoppingtheprogrammeflow
whiletheprogrammeisrunning.Todothis,thechange
you are going to make must be in a step after the running
programme step. If the change is not compatible, relevant
lightswillflashfor3times.
C
If the machine does not pass to the spinning step,
RinseHoldfunctionmightbeactiveortheautomatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.14 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
Loadingdoorlightwillstartflashingwhenthemachine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminatessteadilywithin1-2minutesandtheloadingdoor
can be opened.
If the level is unsuitable, Loading Door light turns off and the
loading door cannot be opened. If you are obliged to open
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see“Cancelingthe
programme”.
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pausemodewhileaprogrammeisrunning.Thelightof
thestepwhichthemachineisinstartsflashinginthe
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
maycanceloractivatetheauxiliaryfunctions;see,“Auxiliary
function selection”.
You may also change the speed and temperature settings;
see,“Spinspeedselection”and“Temperatureselection”.
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
4.15
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pausemode.Theprogrammefollow-uplightoftherelevant
stepduringwhichthemachinewasswitchedintothepause
modewillflash.WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,
temperatureandspeedsettingsifnecessary.PressStart/
Pausebuttontostartthemachine.
4.16 Canceling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecanceled.End/Cancellightwillflashcontinuouslyto
notify that the programme has been canceled.
Yourmachinewillendtheprogrammewhenyouturnthe
ProgrammeSelectionknob;however,itdoesnotdrainthe
waterinside.Whenyouselectandstartanewprogramme,
thenewlyselectedprogrammewillstartdependingonthe
stepthepreviousprogrammewascanceledin.Forexample,
itmaytakeinadditionalwaterorcontinuetowashwiththe
waterinside.
C
Dependingonthestepwheretheprogrammewas
canceled in, you may have to put detergent and softener
againfortheprogrammeyouhaveselectedanew.