Watch-Dog 3388C Product Manual - Assembly
Manual is about: GPRS / CDMA Modems & Solar Panels
of
10
5
Note: If the station is going to be permanently located at the measurement site, it is recommended
that the mounting pole be installed in the ground before attaching any components.
Assembly
Attaching the Solar Panel
1. Attach the Panel Mounting Channel.
3. Slide the notches of the Pipe Mount
Clamp into the Panel Mounting Channel.
The screws will need to be tightened slightly
off-center.
2. Attach the Angle Bar.
4. Attach the Solar Panel to the post using
the Pipe Mount Clamp and the Hose Clamp.
Attaching the Modem Enclosure
1. Slide the notches of the Pipe Mount
Clamp into the Enclosure’s Mounting
Channel.
2. Attach the Modem Enclosure to the post
using the Pipe Mount Clamp.