WatchDog 3619WD Product Manual - Docking Stations
4
Docking Stations
There are two types of docking stations that can be
used with your B-Series Loggers see chart below.
The Docking Station is used to connect the WatchDog B
-Series (Models B102 T/RH, B101 8K, 100 2K) Data
Loggers to a PC. This manual will aid you in using your
docking station. Read it thoroughly to insure proper and
effective use.
Connecting the docking station to the PC
3655K Serial
The 3655K docking station has a serial port interface.
To connect to a PC that does not have a serial port, you
will need to purchase a USB to serial adapter (item
3661USB). This item requires SpecWare 6.0 or greater.
3655K1 USB
The 3655K1 docking station has a USB interface.
Before connecting to a PC for the first time, the USB
driver must be installed. This is done by either installing
or updating SpecWare Basic or Pro v9.1 or higher.
Previous builds of SpecWare 9 can be updated via free
downloads available at www.specmeters.com. The
software version can be checked by selecting “About
SpecWare” from the Help menu.
Model Connection Type
Software Needed
3655K
9-Pin Serial
SpecWare 6.0 or greater
3655K1
USB
SpecWare Basic or Pro
v9.1