WatchDog 3619WD Product Manual - page 5
of
8
5
Connecting the logger to the docking station
The WatchDog B-Series data loggers simply snap onto
the docking station as shown in the photo below. While
attached to the docking station, the logger may be read
and/or relaunched using SpecWare software.
The docking station has two blue buttons/docks. Either
may be used with your data loggers (do not however
use both simultaneously).
Removing logger from the docking station
Grab the data logger on two sides and pull up on a slight
angle (as pictured below). Do not grab the corner of the
backing and pull as the severe bending that results may
separate the backing from the logger.