This guide will help to layout and install ip cameras to a new xl plus nvr system or to simply add more cameras to an already existing system. Connecting a camera for the first time should be done with a short cable and with the camera unmounted where it is easy to diagnose any issues. Below is an e...
Initial installation by now the xl plus system should be running with just your monitor, keyboard, mouse, and possibly an internet connection. All connections should use cat5e or cat6 cabling. The following steps will get us going. 1. Connect a poe switch to a network adapter on the xl plus 2. Chang...
Configuring an ip camera for recording the first step to setting up motion recording is to make sure the software is setup for it. To enter the record schedule setting go to system settings ( ) then record schedule setting on the left. Here we can select when we would like the cameras to record on m...
