Watchguard CHG400 User Manual - Transmitter Unit Features
SYSTEM CONTROLS AND FEATURES
Transmitter Unit Features
Transmitter Power On/Off
Refer to Figure 5. Use this switch to turn the Transmitter device power on
and off. This switch must be in the ON position for all Transmitter-
recording functions to operate properly.
Figure 5: Transmitter Bottom
Talk/Mute Slide Switch
Refer to Figure 6. This control is used to enable microphone voice
recording and to mute the audio during a recording. When the Transmitter
power is turned on and the transmitter is bound with the Base, slide this
control down to begin voice recording. Once activated, the green
Transmitter LED will light and remain solid. Pressing the button again
will stop the recording function if the DVR is configured for this behavior.
The green Transmitter LED will turn off.
Behavior of the slide switch function can be overridden by the video
system (DVR). Settings on the DVR system can, for example, force the
recording function to remain on even though the Transmitter slide switch
is pressed. See the DVR system user manual for complete details.
Mute
With Transmitter voice recording enabled, the slide switch can be pressed
and held to suppress detection of the voice by both the internal and
externally connected (lapel) microphones. Once this switch is help down,
the green Transmitter LED will flash. The Transmitter will continue to
- 10 -
WGD00091
Revision A