Watec WAT-902H2 ULTIMATE Operation Manuals - page 2
AC Adaptor (AD901-120/230)
The recommended AC adaptor for the
WAT-902H
2/3
ULTIMATE for a constant
and stable power supply.
ON
1
2
Area
Switch
1. Default
ON
1
2
2. Center
ON
1
2
3. Lower
4. Center + Lower
ON
1
2
•
Design and specifications are subject to change without notice.
•
Watec is not responsible for any inconvenience or the attendant damages
to the video and monitoring recording equipment caused by misuse, mis-
operation or improper wiring of our equipment.
•
If for any reason the WAT-902H
2/3
ULTIMATE does not work properly, or if you
have any questions regarding installation or operation, please contact the
distributor or dealer from which it was purchased.
1340Z00-Y2000004
11)
Select any required back light area by
⑬
BACK LIGHT to one of its 4
positions.
※
The switches are set to OFF(Default) upon shipment.
12)
Set the shutter mode by
⑭
ELECTRONIC SHUTTER ON/OFF SWITCH
When shutter mode is OFF, fix the shutter speed to EIA1/60, CCIR1/50.
When shutter mode is ON, select the shutter speed mode by
⑮
AE MODE
CONTROL.
※
The switch is set to OFF upon shipment.
13)
Select any required shutter speed by the
⑮
AE MODE CONTROL to one of
its 10 positions.
Shutter Speeds (Sec.)
No.
Mode
EIA
CCIR
0
FL
1/100
1/120
1
ES
1/250
2
ES
1/500
3
ES
1/1000
4
ES
1/2000
5
ES
1/5000
6
ES
1/10000
7
ES
1/100000
8
EI: OFF
1/60-1/100000
1/50-1/100000
9
EI: FL
1/100-1/100000
1/120-1/100000
※
An intense light may leave a trail on the screen longitude. This smearing is
a natural phenomenon and is not due to equipment failure or fault.
※
The dial is set to 0(FL) upon shipment.
Options
To purchase these options, please contact the distributor or dealer from which
you purchased the WAT-902H
2/3
ULTIMATE.
Specifications
WAT-902H
2
ULTIMATE
WAT-902H
3
ULTIMATE
WAT-902H
2
ULTIMATE / WAT-902H
3
ULTIMATE
WAT-902H
2/3
ULTIMATE
Model
EIA
CCIR
Number of
Total Pixels
811(H)
×
508(V)
795(H)
×
596(V)
Number of
Effective Pixels
768(H)
×
494(V)
752(H)
×
582(V)
Sync. System
Internal
Scanning System
2:1 interlace
Video Output
Composite video, 1.0 V(p-p) 75
Ω
(Unbalanced)
Resolution (H)
More than 570TVL (Center)
S/N
More than 50dB (AGC=5dB,
γ
=1.0)
OFF
1/60 sec.
1/50 sec.
FL
1/100 sec.
1/120 sec.
ES
1/250, 1/500, 1/1000, 1/2000
1/5000, 1/10000, 1/100000 sec.
EI: OFF
1/60-1/100000 sec.
1/50-1/100000 sec.
AE Mode
EI: FL
1/100-1/100000 sec.
1/120-1/100000 sec.
AGC
HI: 5-60dB / LO: 5-32dB
MGC
5-60dB
Gamma
Characteristics
γ≒
0.35(HI) /
γ≒
0.45(LO) /
γ=
1.0(OFF)
Lens iris
Video / DC (EIAJ arrangement, Auto-select)
Back Light
Compensation
ON / OFF
Power Supply
DC+12V
±
10%
Operating
Temperature
-10
-
+40
℃
(Without condensation)
Operating Humidity
Less than 95% RH
Storage Temperature
-30
-
+70
℃
(Without condensation)
Storage Humidity
Less than 95% RH
Lens Mount
CS-mount (Back focus adjustable)
Size
36(W)
×
40(H)
×
63(L) (mm)
Weight
Approx. 98g
Contact information
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
i
Add.:
i
254-2 Nihonkoku, Daihoji, Tsuruoka- Shi,
i
Yamagata-Ken, 997-0017 Japan
TEL: +81-235-23-4400 FAX: +81-235-23-4409
:
info-o@watec.co.jp
URL: http://www.watec.net
WAT-902H
2
ULTIMATE
Model
EIA
CCIR
Pick-up Element
1/2 inch interline transfer CCD image sensor
Unit Cell Size
8.4
μ
m(H)
×
9.8
μ
m(V)
8.6
μ
m(H)
×
8.3
μ
m(V)
Minimum Illumination
0.0001 lx. F1.4
Power Consumption
1.32W (110mA)
WAT-902H
3
ULTIMATE
Model
EIA
CCIR
Pick-up Element
1/3 inch interline transfer CCD image sensor
Unit Cell Size
6.35
μ
m(H)
×
7.4
μ
m(V)
6.5
μ
m(H)
×
6.25
μ
m(V)
Minimum Illumination
0.0002 lx. F1.4
Power Consumption
1.26W (105mA)
C-mount Adaptor (30CMA-R)
This lens mount adaptor is used to
convert a CS-mount to a C-
mount.
Mini Stand (MS50)
A convenient stand for the
WAT-902H
2/3
ULTIMATE. With this
stand, the camera can be adjusted
to any desired angle.