Water Factory Systems CoolerMATE Owner's Manual - Coolermate
NOTE: Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain connections. The use of saddle-type
valves are prohibited in: Alaska, Delaware, Idaho, Kentucky, Massachusetts, Michigan, Minnesota, New Hampshire, North Dakota, Ohio,
Oregon, and South Dakota. Check your local plumbing codes for any restrictions that may apply. Massachusetts CMR 248 strictly prohibits the
use of saddle-type valves. The feedwater connection must conform to applicable plumbing codes.
CoolerMATE
®
Installation Diagram
Models CM-1 CTO, CM-2 CTO, CM-2 Lead Plus
5
To Cooler
Outlet Fitting
with Flow Control
Feedwater Inlet
Ball Valve
From Feedwater
Source
To Cooler
Outlet Fitting
with Flow Control
Feedwater Inlet
Ball Valve
From Feedwater
Source
Models
CM-2 CTO
CM-2 Lead Plus
Model
CM-1 CTO