Water Filters Australia K-WFADUOGN Owner's Manual - page 6
INSTALL THE BOILING TANK
• Theboilingtankmustbeinstalledbelowthedualfaucet
• Theboilingtankmustbemountedvertically.
• Theboilertankisdesignedtositonthesinkcabinet
floor. However there are “keyhole” cut-outs provided
in the back of the unit to allow for wall mounting if
required.
• Theboilertankmustbelocatedwithin600mmofthe
dual faucet.
Boiling Tank
Water to
boiling tank
(white tube)
Hot water
to dual faucet
(clear tube)
FAUCET / BOILING TANK CONNECTION
WATERSUPPLYTOBOILER–(whitetube)
• Theendofthewhitetubemustbecutcleanandsquare.
• Removeredlockingclipsfromthewhitepush-lockfitting
before connecting to the boiling unit and tube.
• Firmlyconnectwhitepushlockfittingtoboilingunit,pull
back to ensure it is locked and refit red locking clip.
• Firmlyinsertthewhitetubeintothepush-lockfitting,
pullbacktoensureitislockedintoposition,andrefitthe
locking clip.
Boiling Tank
Water to
boiling tank
(white tube)
Hot water
to dual faucet
(clear tube)
Boiler
Hose
Clamp
HOT WATER FROM BOILER (CLEARSILICONETUBE)
• Connecttheclearsilicontubetothecentraloutlet
located in the top of the boiling tank.
• Securethelargesilicontubewiththehose
clamp supplied.
• Be sure the hoses are not kinked
or twisted.
• Tubes must be cut to a convenient
length to avoid sagging but must
not be stretched taut.
DANGER
WARNING
IMPORTANT
Adesso, Futura
Dual Faucet
Boiling Tank
To Filter/Cold
Water supply
Maximum distance
between faucet
and boiling tank
= 600mm
STEP 4
STEP 5
STEP 6