WaterFurnace Premier2 Owner's Manual - Emergency Heat

10

Premier2 Owner’s Manual

To adjust the heating setpoint, press and hold either the  

 or 

  button while

reviewing the heating setpoint. Note: As the heating setpoint is adjusted the words

DESIRED TEMP

 will be displayed.

To adjust the cooling setpoint, press and hold either

the

 or 

  button while reviewing the cooling

setpoint. Note: As the cooling setpoint is adjusted, the

words 

DESIRED TEMP

 will be displayed.

Emergency Heat

Push and release the 

MODE 

button until the word

E HEAT

 is displayed. Your system is now in the

emergency heat mode. Emergency heat mode uses only

the auxiliary heat to maintain comfort. This should only be

used if  your Premier2 unit is inoperable.

 Note: If your

system is not equipped with auxiliary heat, do not select the emer-

gency heat mode.

Off

Push and release the 

MODE 

button until the display reads 

OFF

.  When the word 

OFF

 is

displayed the system will not provide heating or cooling.

The display still shows room temperature

and the fan is operable.  Avoid using the

OFF 

mode during extremely cold weather

to prevent damage to your home from freezing.

How do I set

the fan?

Fan button

To select continuous fan operation, press

and release the 

FAN

button and the display

will show the words 

FAN ON

. Continuous

fan operation uses low speed to quietly

circulate the air in your home or building.

Continuous fan operation is useful when using an air cleaner for continuous air filtering or

to help maintain even air temperatures throughout a multilevel or large home or building.  The

fan will come on automatically whenever the system is operating, but there will be no indica-

tion of this on the thermostat display.

MODE  ENERGY SA VING

COOL   DESIRED TEMP

HEA T  OFF

AUT O

E HEA T

F AN

ON   AUX HT TROUBLE

AUT O  CLEAN FILTER