Waterline essentials ESSGH60C Users Manual & Installation Handbook - Troubleshooting
terminals:
The blue wire must be connected to the
terminal marked N (Neutral) LOAD or
coloured black. The brown wire must
be connected to the terminal marked L
(Live) LOAD or coloured red.
The green/yellow coloured wire must
be connected to the terminal marked E
(Earth) or coloured green.
Warning: This appliance must
be earthed.
The fused spur must be accessible after
installation.
If the supply cord is damaged, obtain
a special cord from the Customer Care
Helpline, which must be fitted by a quali-
fied person.
Troubleshooting
Before you call Customer Care, please
check the following points:
Burner fails to ignite:
• Check the electricity supply is on.
• Check the fuse.
There is a spark to the burner
but it fails to ignite:
• Check that the flame holes in the
flame spreader are clear of water or
deposits.
• Check that the gas supply is turned
on.
Smell of gas:
• Check that none of the controls have
inadvertently been turned on. If all
the controls are in the off position,
turn off the gas supply & call Cus-
tomer Care.
The burner flame appears
uneven:
• Check the burner is fitted correctly.
• Check the flame holes in the flame
spreader are clear of water or de-
posits.