Watermaid ecoblend Owner's Handbook Manual - page 14
- 12 -
Copyright © 2017 Watermaid Pty Ltd
Version 20170223
Step
Action
Display
1
Press TIMER. Ensure "Timers (ON)" is displayed. If "Timers
(OFF)" is displayed, press ENTER to enable the timers.
2
Use the ▲ and ▼ buttons to select the desired timer to be used
(1 to 6). The
symbol indicates the selected timer. Pressing the
▼
button past Timer 6 will present the
option to
reset timers
back to the factory default (Timer 1, all days commencing at 6:00
a.m. for 8 hours).
3
Press ENTER to display desired timer screen (Timer 1 is used for
this example).
4
Press DAY (day field will now flash) and then use the ▲ and ▼
buttons to select the desired running day(s). The highlighted
"Day" field will cycle through the following options each time the
▲
is pressed; All days, Off (only shown for Timers 2 – 6),
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
Sunday, Weekdays, Weekends.
5
Press HOUR (hour field will now flash) and then use the ▲ and ▼
buttons to select the start time hour.
6
Press MIN (minute field will now flash) and then use the ▲ and
▼
buttons to select the start time minutes.
7
Press TIMER and then use the ▲ and ▼ buttons to set the length
of operation (in hours).
8
Press TIMER to save the timer settings. To program additional
timers, press the ▲ and ▼ buttons to scroll through the
available timers and then press ENTER to select (and follow steps
4 to 8 again).
9
Press MENU to exit the timer menu and return to the home
screen. If the timer has been set to run within a period that
incorporates the current time (i.e. timer set to run from 09:00
until 17:00 and the current time is 16:02), the chlorinator will
turn on (displaying "RUNNING" mode on the LCD screen) when
returning to the home screen.
or