WaterRower A1 Owner's Manual - page 14
Other manuals for A1:
Operating Instructions, Owner's Manual & Assembly Instructions, Assembly Manual
of
28
13
STEP 1
STEP 2
Using the Allen key (M) provided, remove block from monorail (Ai) and
attach rear leg (Aii).
Lay the sub rails on the floor with ends parallel. Dolly wheels on the outside.
Attach the end of the mono rail (A) to the angled ends of the sub rails (C)
with the Allen key (M) and 4 pairs of the JCN nuts (F) and JCB bolts (E) .
Do not tighten all the way.
E
F
× 4
× 4
M
M
× 2