WaterRower A1 Owner's Manual - page 17
Other manuals for A1:
Operating Instructions, Owner's Manual & Assembly Instructions, Assembly Manual
of
28
16
STEP 7
Stand the machine up. Insert 2 of the Back of Footboard Bolts (which were
removed in step 4) into the footboard bracket and tighten.
Having kept all the bolts loose will allow easier alignment of the bolts and
rivnut holes in the footboard.
Do not tighten all the way.
STEP 8
Insert the sub bracket bolt (J) through the “U” in the rail sub bracket (L)
into the rail, to hold the bracket in place for step 9.
× 2
K
M