Watersnake Slider Pro Owner's Manual - page 2
Watersnake
2
WATERSNAKE ELECTRIC MOTORS
Congratulations and welcome to a world of silent motoring.
Powerful yet silent, the Watersnake electric motors are built to suit all angling
conditions. High quality materials, superior design and precision engineering
make these motors longwearing and reliable.
Please read manual completely before starting installation.
ATTACHING THE MOTOR TO YOUR BOAT
The slider mount integrates a quick release bracket mechanism.
Attach the bracket to the bow of the boat, taking care to ensure it is on the
centreline of the boat and placed forward enough so that when the motor is
attached the shaft of the motor is not making contact with the boats gunwale
rubber. With the bracket in position, mark the holes for drilling, ensuring as
you do that the bow area below the mounting location is clear and accessible.
Mount the plate to the bow using stainless steel bolts, nuts and washers. It is
important when doing this work that the boat is level.
Place the upper mount of the motor in
position on the bracket, tighten the lock
screw and you are ready for the water. To
release the motor simply unscrew the locking
plate lock screw located within the mount.
Watersnake Distribution Pty Ltd accepts no
liability for injury or damage caused while
drilling/mounting this motor. Please wear
appropriate protective clothing and eyewear/
face shield.)
PLEASE NOTE: