Watersports Innovations The Boost Box WS 1107 Installation & Operation Instructions - Step 3 –
5
Chapter 1
Installation Instructions
Step 3 –
Stereo Control Cable Installation
The Stereo Control Cable plugs into the back of the Control
Unit, and into the back of the MB Quart stereo head unit.
Both ends of the cable are male 3.5mm jacks and the ends of
the cable are labeled. The proper ends must be connected
to the Control Unit and the stereo. The Boost Box will not
function if the Control Cable is reversed.
If there are additional MB Quart remotes (not included) to
be connected to the 3.5mm jack on the rear of the stereo
head unit, then use the optional Y adapter. Plug the Boost
Box and the MB Quart remotes into the female ends of the
Y adapter, and plug the male end of the Y adapter into the
stereo head unit. (See figure on page 1)
imPortAnt note: the Stereo control cable end
labeled “Boost Box” muSt be plugged into the back
of the Boost Box control unit. if the optional Y adapter
is used, the end of the Stereo control cable labeled
“Stereo” must be plugged into the Y adapter.