Waterstage Air to Water Operation Manual - page 12
3.7 Parametering the setting
3.7.1 General
Only the parameters accessible to levels:
End user
Are described in this document.
The parameters accessible at level:
Commissioning
Engineer
… are described in the document reserved for
these professional specialists.
Do not make any
modifications to these parameters without advice
from these professional specialists. Incorrect use
of any kind may result in serious malfunctioning.
3.7.2 Setting parameters
With the screen on basic display.
-Press
OK.
Once in "End user" level.
-Scroll the menu list.
-Choose the desired menu.
-Scroll the function lines.
-Choose the desired line.
-Adjust the parameter.
-Check the setting by pressing
OK.
-To return the menu, press
ESC.
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
3.7.3 List of "End user" settings
Line
Function
Setting range
or display
Setting
increment
Basic
setting
Time of day and date
1
Hours / minutes
00:00... 23:59
1
2
Day / Month
01.01... 31.12
1
3
Year
1900... 2099
1
Operator section
20
Language
English, Deutsch, Français,
Italiano, Nederlands,...
English
OK
Brief
press
End user
OK
OK
OK
Tim and date
Hours / minutes
1
Hours
1...24 h
User interface
Day / Month
2
Minutes
0...60 min
CC1 time program
Year
3
...
Operation manual "1534 - EN"
Air to Water Heat Pump
- 12 -