1. DL manuals
  2. Waterway
  3. Water Pump
  4. BOOSTER PUMP
  5. Installation Instructions

Waterway BOOSTER PUMP Installation Instructions

Summary of BOOSTER PUMP

  • Page 1

    810-4800.1017 ©2017 waterway plastics installation instructions important safety instructions read and follow all instructions save these instructions.

  • Page 2: Warning:

    810-4800.1017 ©2017 waterway plastics care of electric motor protect from heat 1. Shade the motor from the sun. 2. Any enclosure must be well ventilated to prevent overheating. 3. Provide ample cross ventilation. Protect against dirt 1. Protect from any foreign matter or splashing water. 2. Do not s...

  • Page 3: Installation

    810-4800.1017 ©2017 waterway plastics the waterway booster pump supplies high pressure water to the pool cleaner to optimize cleaning efficiency. The pump is not self-priming and should only be used when the pool filtration pump is on. Running the booster pump without the filtration pump will damage...

  • Page 4

    810-4800.1017 ©2017 waterway plastics to ensure proper water flow: • use rigid pvc pipe with a minimum diameter of 3/4”, (1-1/2” is recommended) for the dedicated return line. Flexible pvc piping is not recommended as it can be damaged by expansion and movement caused by the surge of pump pressure. ...

  • Page 5: Booster Pump

    810-4800.1017 ©2017 waterway plastics checking water flow after the system is plumbed, verify water flow to the booster pump by turning on the filtration pump and disconnecting the inlet supply line at the pump. Water should flow from the line. If there is no flow: • verify that the installation is ...