Waterway BOOSTER PUMP Installation Instructions - Booster Pump
810-4800.1017
©2017 Waterway Plastics
Checking Water Flow
After the system is plumbed, verify water flow to the booster pump by turning on the filtration pump and disconnecting the inlet supply line at
the pump. Water should flow from the line.
If there is no flow:
• Verify that the installation is correct.
• Install a ball valve on the return line after the booster pump inlet.
• Use smaller eyeball fittings in the pool return lines or plug a return line. Once flow is established, the pump is ready for operation.
Winterizing
If installed in an area prone to freezing temperatures, the pump should be winterized to prevent freeze damage.
• Pull out drain plug and drain all water from pump.
• Disconnect plumbing hose at pump inlet and outlet ports.
When reinstalling, recut the hose to eliminate crimps or bulges, and to ensure a straight edge before reconnecting.
1
2
3
4
9
8
6
7
5
12 13
14
15
16
11
17
18
17
2
819-0013
SCREW SLOT HEX WASHER 1/4" X 1_1/4"
16
2
819-0800
SCREW, #12 x 1.00" LG, TYPE AB, SELF-TAPPING, PNHD,
PHIL.
15
4
819-0011
SCREW, 3/8"-16 X 1 HEX CAP HEAD, POOL PUMP
14
1
13
4
820-0019
BRASS INSERT, 3/8"-16 UNC-2B X 5/8" (.625) VOLUTE
12
19
820-0013
HEX NUT, SERATED 1/4-20-SAND FILTER
11
1
672-1380
MOTOR MOUNT, BOOSTER PUMP
9
1
872-6200
SLEEVE, 1 1/2" X .049 WALL SS304
8
1
313-8400
3/4 HP IMPELLER BOOSTER PUMP
1
3/4 HP IMPELLER BOOSTER PUMP BRASS INSERT, 1/2"-20 UNC-2B X 1"
7
1
319-3290
6
2
805-0268
ORING #268
5
1
311-8300
SEAL PLATE BOOSTER PUMP
4
1
315-8300
VOLUTE BOOSTER PUMP
3
19
819-2590
BOLT, HEX HD, 1/4"-20UNC X 1-1/8"LG SS
2
1
805-0112
O-RING, #2-112, .487 I.D. x .103 W
1
1
715-8400
DRAIN PLUG 3/8" BOOSTER PUMP
NO
ITEM QTY PART NUMBER
DESCRIPTION
18
4
550-8700
HOSE, FITTING AND CLAMP KIT
BOOSTER PUMP MOTOR
3810333
PUMP SEAL SET
BOOSTER PUMP
EXPLODED VIEW
Booster Pump
3810430-XX
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
www.waterwayplastics.com • waterway@waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
WARRANTY
For product registration visit: www.waterwayplastics.com.
For Warranty questions or claims please contact point of purchase.