Wattbike Wattbike Servicing Manual - page 6
of
11
wattbike.com
@wattbike
/wattbike
/wattbike
1.2 Removal of 2nd generation covers
Tools required
2.5mm Allen key
4mm Allen key
3mm Allen key
Long 3mm Allen key
5mm Allen key
6mm Allen key or 15mm pedal spanner
8mm spanner
Flathead screwdriver
Pliers
1.2a
Stem caps & step through cover
1.
Move the seat stem and handlebar stem to the maximum height (do not exceed maximum marking).
2.
Use a 2.5mm Allen key to remove the screws on either side of the saddle and handlebar stem caps.
3.
Slide the stem caps up the stems.
4.
Use a 2.5mm Allen key to remove the 4 screws on the step through cover.