Wattbike Wattbike Servicing Manual - page 7
of
11
Wattbike Service Manual | QF36 – Issue 2 – Issue date 01/11/2015
5.
Remove the step through cover.
1.2b
Right hand cover
1.
Use a flathead screwdriver to remove the magnetic adjuster dial sticker.
2.
Use a 4mm Allen key and insert it in to the middle of the magnetic adjuster dial and unscrew the Allen
headed bolt.
3.
Rotate the knob so that magnetic resistance is fully on.
4.
Remove the magnetic adjuster knob
5.
Use a 3mm Allen key to remove the 4 long bolts either side of the saddle and handlebar stems.
N.B Keep
separate from the other screws as these are a different length.