WattBox WB-200-IW-2 Owner's Manual

Summary of WB-200-IW-2

  • Page 1

    Owners manual ™ li fe ti me pro du c t w arr an ty surg e protector $5,000 protected grounded li fe ti me pro du c t w arr an ty surg e protector $5,000 protected grounded wb-200-iw-2 key features surge protection with fireproof movs advanced ceramic mov technology reduces risk of fire from surges. ...

  • Page 2

    Pg.2 wb-200-iw-2-wht installation and users manual package contents (1) wb-200-iw-2 (4) mounting screws (3) wire nuts required wiring we recommend the use of 12/2c or 14/2c in-door building electrical wire to connect to the wb-200-iw-2. All wiring should be performed by a licensed electrician . Veri...

  • Page 3

    Wb-200-iw-2-wht installation and users manual pg.3 © 2012 wattbox ™ front panel installation 1. Grounded indicator led green: wattbox power conditioner is grounded. Off: incoming ac outlet is not grounded and requires inspection by an electrician. 2. Protection indicator led green: wattbox is powere...

  • Page 4

    Pg.4 wb-200-iw-2-wht installation and users manual important safety instructions read and observe the following safety points at all times: warning – to reduce the risk of fire or electrical shock, do not expose this equipment to rain or moisture warning – power sources • the wb-200-iw-2 is rated fo...

  • Page 5

    Wb-200-iw-2-wht installation and users manual pg.5 © 2012 wattbox ™ troubleshooting symptom possible cause remedy no power to devices plugged into the wb-200-iw-2. Wb-200-iw-2 is not receiving power. • verify that the circuit breaker on electrical panel has not been tripped and is on. • check the in...

  • Page 6

    Pg.6 wb-200-iw-2-wht installation and users manual outlets type nema 5-15 number of outlets 2 ac power line voltage 120v, 60hz ul current rating 15a voltage protection rating (ul 1449 3rd edition) 500v joule rating 1080 joules surge component ceramic encased mov protection modes l-n, l-g, n-g peak i...

  • Page 7

    Wb-200-iw-2-wht installation and users manual pg.7 © 2012 wattbox ™ snapav surge protector lifetime product warranty snapav warrants to the purchaser of any standard snapav surge protector that the surge protector shall be free of defects in design, material, or workmanship, and snapav will repair o...

  • Page 8

    4. Determination of failure: snapav will evaluate the protector for surge damage. The protector must show signs of surge damage or must be performing outside of design specifications relative to its surge protection capability. Opening the enclosure, tampering with, or modifying the unit in any way ...