Watts Industries MILUX User Manual

Other manuals for MILUX: User Manual

Page of 4

Download

Bookmark us

ATTERIES REPLACEMENT

How to change the batteries

Open the front panel by pressing on then left side

button. Then remove the front panel by opening it like

a window. You now have access to the batteries

Replace the three LR6 AA 1.5V batteries with new ones

(Alkaline cells recommended)

IMPORTANT: You have 1 minute to change the batteries

IMENSIONS

& W

IRING

N. OPEN

N. CLOSED

COMMON

ECHNICAL CHARACTERISTICS

Measured temperature precision

Set temperature precision

Set temperature range

Regulation characteristics

Driving element

Connection

Batteries

0.1°C (or 0.1°F)

0.5°C (or 0.5°F)

5°C - 35°C for comfort and reduced, 0,5°C – 10°C for anti-freeze

- regulation speed: 7.5 cycle per hour (cycle of 8 minutes)

- regulation band: 2°K of proportional band (with adjusted power)

8A RELAY (with normally ON and normally OFF contacts).

3 points screw connector on the rear part of the box.

3x LR6 AA 1.5V Alkaline batteries.

Page 1
Gb b atteries replacement how to change the batteries open the front panel by pressing on then left side button. Then remove the front panel by opening it like a window. You now have access to the batteries replace the three lr6 aa 1.5v batteries with new ones (alkaline cells recommended) important:...
Page 2: User Guide
Gb za des tourettes 43 800 rosieres ( france ) tél : +33 471 574 049 fax : +33 471 574 090 e-mail : sales@wattselectronics.Com • select hot or cold operation • easy wiring (2 conductor wire) • keypad lock function (children safety) • battery powered to prevent loss of program and time during power c...
Page 3
Holiday function activated temperature overridden central heating working temperature room temperature displayed use + / - keys to change temperature use w x keys to change mode operating mode menu batteries weak week days time display gb instructions how to use your milux thermostat graphic program...
Page 4
Gb off mode: use this mode if the heating or cooling installation needs to be turned off. Milux chrono-thermostat will switch off the installation and then switch itself off (blank). User programs are saved, time is kept running and battery consumption becomes very low. Any key will wake up the milu...