Watts Premier RO-PURE Installation, Operation And Maintenance Manual

Summary of RO-PURE

  • Page 1

    Installation, operation and maintenance manual warning please read carefully before proceeding with installation. Your failure to follow any attached instructions or operating parameters may lead to the product’s failure and possible damage to property. Save manual for future reference model: ro-pur...

  • Page 2: Service Record

    Service record model number:__________ serial number:___________ date of purchase:__________ date of install:___________ installed by:_____________ date sediment carbon membrane carbon filter pre-filter (2-5 years) post-filter (6 months) (6 months) (6 months) notes: page 2.

  • Page 3: Warranty Registration

    Warranty registration thank you for selecting watts premier for your water filtration needs. 4 ways to register 1. On-line at www.Wattspremier.Com register your product on-line and receive a 5% discount on your next on-line order, plus receive reduced shipping. 2. Call in your information 1-800-752-...

  • Page 4

    Thank you for your purchase of a state of the art watts premier reverse osmosis (ro) water treatment system. Waterquality concerns are becoming more of a focus for the public. You may have heard about contaminants in the drinking water, such as arsenic, perchlorate, chromium, cryptosporidium or giar...

  • Page 5: Table Of Contents

    Thank you for your purchase of a watts premier reverse osmosis system. With proper installation and maintenance, this system will provide you with high quality water for years to come. All of premier’s water enhancement products are rigorously tested by independent laboratories for safety and reliab...

  • Page 6: Operational Parameters

    Operational parameters installation needs to comply with state and local plumbing regulations. This system is intended to be installed on the cold water line only. Operating temperatures: maximum 100°f (37.8°c) minimum 40°f 4.4°c) operating pressure: maximum 85 psi (7.43 g/cm2) minimum 40 psi (2.80 ...

  • Page 7

    Note: most sinks are predrilled with 1 ½” or 1 ¼” diameter hole that you can use for your ro faucet (if you are already using it for a sprayer or soap dispenser, you will need an additional hole for the faucet). Drill a hole for the faucet in a porcelain sink step 1 step 2 step 3 step 4 porcelain si...

  • Page 8

    Watts premier chrome monitored & non-monitored (top mount) faucet installation minimum maximum mounting hole size 1.00” 1.25” torque on toggle bolt 5lb.In. (max) step 6 step 7 step 8 step 9 gather and identify the faucet pieces. Remove faucet base & faucet spout from their respective plastic bags. F...

  • Page 9

    Green tube connection (from ro module to the adapta valve) step 11 step 12 remove a brass nut, plastic sleeve and brass insert from the parts bag. Place nut on the green tube (coming from the ro module) first, then the plastic sleeve (small taper end of plastic sleeve must point to the end of tube) ...

  • Page 10

    Drain saddle installation - part# 164016 drain saddle fits standard 1 ¼” – 1 ½” drain pipes caution: if you have a garbage disposal, do not install the drain line near it. Installation of the drain line must be either above the disposal, or if a second sink drain is available, install it above the c...

  • Page 11

    How to use the quick connect fittings for tubing connections to make a connection, the tube is simply pushed into the fi tting. Place a piece of tape 1/2” from end of tube to indicate how far the tube should be inserted. The unique patented locking system holds the tube firmly in place without defor...

  • Page 12

    Blue tube connection (from the ro module to tank) step 22 position tank in desired location. Stand it upright or lay it on its side (using the black plastic stand). Measure the blue tube (marked “tank”) from the ro module over to the tank and cut it to length leaving a straight edge on the end of th...

  • Page 13: Start Up Instructions

    Red tube connection (from faucet to the flow restrictor) step 27 determine where the 1/4” red tubing from the faucet and the open end of the flow restrictor (attached to the end of the 1/4” black tubing from the ro module) would join together comfortably. Cut the tubes to length, making sure the cut...

  • Page 14

    This reverse osmosis system contains a replaceable component (the ro membrane) which is critical to the ef ficiency of the system. Replacement of this reverse osmosis membrane should be with one of identical specifications as defi ned by watts premier to assure the same efficiency and contaminant re...

  • Page 15: Parts List

    Check air pressure in the tank note: check air pressure only when tank is empty of water! Check air pressure in the tank when you notice a decrease in available water from the ro system. Step 1 it is recommended that you drain the tank of water, and then pump up the ro tank in order to ensure all wa...

  • Page 16: Trouble Shooting

    Trouble shooting problem cause solution 1. Low/slow production low water pressure assure a minimum of 40 psi incoming water pressure. Premier sells a booster pump if home water pressure is low. Maker sure water supply is turned on and adapta valve is all the way open 2. Milky colored water 3. Water ...

  • Page 17

    Watts premier inc. 1725 w. Williams drive c-20 phoenix, az 85027 usa california certification # 07-1882 ro-pure system conforms to nsf standard 58 for specific claims. General use conditions: 1. System to be used with municipal or well water sources treated and tested on regular basis to insure bact...

  • Page 18: Arsenic Fact Sheet

    Arsenic fact sheet arsenic (as) is a naturally occurring contaminant found in many ground waters. Arsenic in water has no color, taste or odor. It must be measured by an arsenic test kit or lab test. Public water utilities must have their water tested for arsenic. You can obtain the results from you...

  • Page 19

    Other products from watts premier watts premier has other fine water filtration products and accessories to enhance your water and to compliment your existing ro system. Listed on the next several pages are only a few of the items we offer. Visit our website at www.Wattspremier.Com or call our custo...

  • Page 20

    Watts premier ice maker kit - high efficiency replaceablefilter that can last up to 5 years or 20,000 gallons. Prefect for residential and commercial ice makers as well as refrigerators, drinking fountains, coffee & tea brewers, motor homes and campers. Reduces chlorine taste and odor. Part no. 5003...

  • Page 21

    Removing chlorine from your shower special chlorgon & kdf media – more effective then carbon medias with hot water applications in the removal of the following. √ free chlorine (cl-) √ combined chlorine (sodium hypochlorite) √ hydrogen sulfide (rotten egg smell) √ plus, its ph balanced. √ iron oxide...

  • Page 22: Limited Warranty

    Limited warranty what your warranty covers: if any part of your watts premier reverse osmosis system is defective in workmanship (excluding replaceable filters and membranes), return unit after obtaining a return authorization (see below), less tank, within 3 years of original retail purchase, watts...