Watts Premier ZERO WASTE RETRO Installation Instructions

Summary of ZERO WASTE RETRO

  • Page 1

    Solenoid valve, electric pump and pressure switch assembly transformer parts bag rerverse osmosis system water return valve for hot water line with brass insert, delrin sleeve and brass compression nut. Four pump mounting screws, drain plug and four plas- tic nuts. Check valves and flow restrictor a...

  • Page 2

    I nstallation steps for zero waste reverse osmosis retrofit kit note: ro unit must be installed a mimimun of 25 feet from hot water heater. Step 1 turn off the hot (#1 in fig. 1) and cold (#2 in fig. 1) water supply lines to the sink at the angle stop valves. If system is hooked up to an ice maker c...

  • Page 3

    Serial # nsf premier membrane cold water angle stop valve sediment filter carbon filter reverse osmosis storage tank reverse osmosis water faucet carbon filter flow restrictor rev 9/19/02 electric pump sol. Valve transformer 110vac to 24vac wire harness for valve & pump pressure switch check valves ...

  • Page 4: Warranty

    Warranty limited warranty: watts pure water warrants each product to be free from defects in material and workmanship for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the company will, at its option, replace or recondition the prod...