Waves Abbey Road EMI TG12345 User Manual - page 12
Waves / Abbey Road TG12345
User Guide
12
Spread (Stereo Component Only)
Controls the balance between the mid and sides by changing the level of the sides only,
while the level of the mid remains constant. This feature is available in all cassette modes,
not just in MS. The spread is very similar to an MS matrix; it is faithful to the plugin’s analog
origins, however, in that the encoding and decoding of the matrix do not cancel each other
perfectly, giving the spread its distinctive vintage character.
Range: -12 dB to 6 dB (0.1 dB increments)
Default: 0
Monitor (Stereo Component Only)
Selects the source of the monitor output.
• Left – Left output is sent to both sides (in MS Mode this monitors the mid)
• Mono – Left and Right outputs are summed to mono and trimmed down by 6 dB
• Stereo – Stereo mode
• Right - Right output is sent to both sides (in MS Mode, this monitors the sides)
Default: Stereo
Output
Two faders (one per channel) that control output gain after processing.
Range: -48 dB to 24 dB
Default: 0 dB
Metering
VU Meter
Displays input, output and gain reduction levels, depending on your selection.
Range IN/OUT: -20 VU to 3 VU
Range GR: -20 VU to 9 VU
Peak Meter
Displays signal peak output level.
Range IN/OUT: -20 dBfs to 0 dBfs
Range GR: -20 dBfs to 9 dBfs