Waves JJP Drums User Manual - page 5
Chapter 2 – Quickstart Guide
• Insert the JJP Drums plug-in on the track you wish to process.
• Choose the Drum Type:
KICK IN – For main kick/bass drum tracks.
KICK OUT– If your kick was recorded using two microphones, use for the
mic positioned further away from the drum.
SNR TOP – For main snare track. If your snare was recorded using two
microphones, use this to process the top mic.
SNR BOT – If your snare was recorded using two microphones, use this
to process the bottom mic.
TOMS – For both mounted and floor toms.
• Adjust the Sensitivity control until you achieve proper (yellow) levels, as indicated
by the Sensitivity LED.
• Adjust the various Main Section controls located below the Sensitivity knob to
shape your sound.
• Use the Center Section faders to adjust the sonic color.
• If the Clip LED lights up repeatedly or stays lit, lower the Output level fader
accordingly.
JJP has optimized the default settings for each Type. These settings may or may not
require additional adjustment once optimal Sensitivity has been achieved.
Waves JJP Drums
User Guide
- 5 -