WAY Systems way5000 Quick Reference Manual - Getting Started Way2Pay
GETTING STARTED WAY2PAY
POWER
To turn the way5000 power on, press the Power On/Off key
until the WAY logo appears and then release. To turn power
off, press the Power On/Off key until “Powering Off Please
Wait” appears.
UPDATES
Upon power up, the way5000 may display “Check for
updates?”. Press F2 (No) to proceed directly to the idle screen.
Press F1 (Yes) to check for updates. If there are updates
scheduled, they will be downloaded. After the download,
press the F1 key to continue to the way5000 idle screen.
If no updates are scheduled, the way5000 will display
“No scheduled download” and proceed to the idle screen.
WAY2PAY
To enter the Way2Pay (payments) main menu, press the 1 key
or press the F2 key.
way5000 NAVIGATION
Press the number corresponding to the function that
you want from the menu. Or, use the navigation button
to move up and down through menus and then press the
left or right screen addressable soft keys to operate the
corresponding function.
CANCEL AN OPERATION OR ExIT
TO ThE PREVIOUS SCREEN
To back up to the previous menu level, select the Back function
[F1] or press the red Cancel [CANC] key. To make a correction
in a data entry field (card number, expiration date, amount, etc.),
press the Clear [CLR] key.
way5000 POWER SAVE MODE
After approximately 4 minutes of not being used, the way5000
will go into power save mode. The screen will dim and no keys
will be active until the Power On/Off key is pressed briefly
and released. (This mode does not appear while plugged into
a power supply.)
TRANSACTIONS NOTE
The following transactions are shown as basic transactions.
Some processors may also select options for additional fields
such as security code, zip code, invoice number and others.
Please see the Additional Fields Section for more information.
2