Wayne-Dalton Confort Installation, User Operation & Maintenance Manual - Package Contents
4
Note: Use these notes of installation, Use, and Maintenance in conjunction with the Drawings of installation, Use, and maintenance to perform the
installation. The following letters & numbers in parenthesis, [example: (a1)] cross reference items listed in each diagram of the Drawings of Installation,
Use, and Maintenance manual.
PACKAGE CONTENTS
PACKAGE CONTENTS “A” (SEE PAGE 2 OF DRAWINGS OF INSTALLATION, USE AND MAINTENANCE MANUAL)
CALL OUTS
PARTS
QUANTITY
A1
Pre-assembled Door
1
A2
Horizontal Track
1 pair
A3
Yellow And Black Warning Label
1
A4
Spreader Bar Assembly *
1
[*Attached to the bottom door section during packaging]
A4.1
Spreader Bar
1
A4.2
Slider Bars **
2
A4.3
“L” Bracket **
2
[**Attached To Spreader Bar]
A5
“L” Bracket
2
A6
Ø 6 x 15 mm (1/4” - 20 x 9/16”) Track Bolt
10
A7
Ø 6 mm (1/4” – 20) Flange Hex Nut
10
A8
Ø 8 x 40 mm (5/16” x 1-5/8”) Lag Screw
13
A9
Striker Plate
1
A10
Molded Transition Track
1 Pair
A11
Anchors
13 (not supplied)
TOOLS REQUIRED “B” (SEE PAGE 3 OF DRAWINGS OF INSTALLATION, USE AND MAINTENANCE MANUAL)
CALLOUTS
PARTS
QUANTITY
B1
Electric Drill (With Clutch)
1
B2
5 mm (3/16”) Drill Bit
1
B3
Level
1
B4
Ratchet Wrench
1
B5
75 mm (3”) extension
1
B6
11 mm (7/16”) Wrench
1
B7
Tape measure
1
B8
Screw Driver (Flat Head)
1
B9
Step ladder
1
B10
Safety Glasses
1
B11
Gloves
1
B12
11 mm (7/16”) Hex Head Driver
1