WayteQ N720B User Manual - page 11
In addition, there is a close icon on top right corner and a status message on down, the
status messages are for pair and connection. When the blue light start flickering, it
means the Bluetooth has already been opened, but didn’t connect, if the blue light keep
bright, then connected.
If PND and Bluetooth mobile phone have not paired ( this reference instruction is for
Samsung series),it will display “disconnected”
2)To pair PND with Bluetooth mobile phone, please click “Pair” icon, and enter into pair
interface, then it will count down form 90 seconds
Put the mobile phone near the PND, and press TOOLING.>>BLUETOOTH>>PAIR
DEVICE>>OPTION>>NEW PAIR OF DEVICE, After a while, mobile phone will find a new
device“XXXX”, that is the PND device. Press the “OPTION” again, the mobile will ask you
to enter the pin code XXXX of device, then enter 8888 and confirm, the mobile phone
will clue on pair finished. Press “OPTION” in third time, choose “connect”, it will
connect successfully, and a speaker sign will appear beside the Mobile devices on the
phone. And the PND will end the fair display automatically, and mobile sign on device
will change to red, and the direction blue light will change from twinkle to keep bright.
Then you can make a call.