Wbox OE-19LED User Manual - page 3
14. If any of the following occur, disconnect the power to the monitor and refer servicing to qualified service personnel:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the monitor.
C. If the monitor has been exposed to rain, water or other liquids.
D. If the monitor does not operate as expected as per the operating instructions. Adjust only those controls as de-
scribed in the operating instructions; improper adjustment of other controls may cause the monitor to become inop-
erative and may void the warranty.
E. If the monitor has been dropped or the cabinet has been damaged.
F. If the monitor exhibits a distinct change in performance, indicating a need for service.
PLEASE NOTE:
k
The power supply cord is used as the main disconnect device. Ensure that the power outlet is located/installed near the
monitor and is easily accessible.
▶ NEVER REMOVE THE BACK COVER
Only specially qualified personnel should remove the back cover.
▶ DO NOT USE IN ENVIRONMENTS THAT MAY CAUSE HAZARDS
To prevent electrical shock or a fire hazard, do not expose the monitor to rain or moisture. This monitor is designed to
be used in the a residential or commercial environment. Do not subject the monitor to excessive vibration or dust, or to
corrosive gases.
▶ KEEP IN A WELL VENTILATED LOCATION
Ventilation slots are provided on the cabinet to control the internal temperature of the monitor. Do not cover these ven-
tilation holes or place anything on the unit which might block those slots.
▶ AVOID EXCESSIVE HEAT
Avoid placing the monitor in direct sunshine or near a heating appliance.
▶ TO ELIMINATE EYE FATIGUE
Do not use the monitor against a bright back ground or where sunlight and other light sources will shine directly on the
monitor.
▶ BE CAREFUL OF HEAVY OBJECTS
Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power cord can cause
fire or electrical shock.
Cautions