Weaver Baldwin VO1000 Owner's Manual - page 7
CAB-1 Remote Controller® Commands
CAB-1 Remote Controller® Numeric Keypad Commands
When you press the AUX1 on CAB-1 Remote Controller®, you turn
the numeric keypad into 10 command buttons. The keypad lets you control
extra command features (until you press any top row button).
0 Stops and resets the engine. Resets the direction to FORWARD. Resets
RailSounds® to automatic RPM. Horn Blows. RPM's return to automatic.
1 Raises the volume of RailSounds®.
2 CrewTalk™ is the sound of inaudible walkie talkie communication.
3 Raises RailSounds® RPM level. Starts up RailSounds®. RPM's
increase. Startup sequence commences.
4 Lowers the volume of RailSounds®.
5 Activates the RailSounds® shutdown sequence. Just like the real thing,
your locomotive RPM's must be at idle for shutdown to occur. Press 6
repeatedly to lower RPM's until they won't descend further. Your locomotive
is now at idle. Press 5 to initiate the shutdown sequence. Diesel shutdown
commences. Remember, the horn, bell and RPM's will not sound until you
restart RailSounds®.
Page 7
Press AUX1 to activate numeric
keypad
Press AUX2 to turn headlight on
and off
Press HALT to shut down all
Powermaster® electrical
outlets on your railroad. Stops
all Command equipped
engines in operation.
Press WSTL/HRN to activate
horn. Release it to discontinue.
Press BELL once to activate
the bell, again to discontinue.
Press DIR - the locomotive
decelerates to a complete stop;
turn the throttle up, and the
locomotive will accelerate in
the new, opposite direction.
There is no neutral state.
Press and hold BOOST for
extra power. Release BOOST
and return to the engine's
previous speed.
Press and hold BRAKE to slow
down or stop. Release BRAKE
and return to previous speed.
Couple F/R buttons will release
coupler and produce coupler
release sounds.
Turn the THROTTLE to the
right to accelerate, left to
decelerate.