Webasto BlueHeat Installation instructions manual - - D
B
LUE
H
EAT
- D
ODGE
R
AM
2500 / 3500
2
I
NSTALLATION
11
Fuel Pump Installation - Diesel
– Install fuel pump (5) on vehicle frame with hardware provided
in kit. Refer to Figure 25 for mounting location.
– Install rubber fuel line adapter (3) on inlet side of fuel
pump (5) and secure with clamp (4).
– Insert fuel line (1) into rubber fuel line adapter (3) until it
bottoms out against nipple and secure with clamp (2).
– Install rubber fuel line adapter (8) on outlet side of fuel
pump (5) and secure with clamp (7). Refer to Figure 26.
– Insert fuel line (10) into rubber fuel line adapter (8) until it
bottoms out against nipple and secure with clamp (9).
– Route fuel pump harness (6) to fuel pump (5) following vehicle
brake/fuel lines and connect to fuel pump (5)
– Cover the fuel line (10) with black conduit. Route the fuel
line (10) with the vehicles fuel lines (11) to the underhood
compartment. Refer to Figure 27.
Fuel Pump Installation - RAM 3500 (HEMI)
– The fuel pump (12) for the HEMI application is located
above the fuel tank on the frame as shown in Figure 28.
– Follow the instructions above for fuel pump installation.
Front
6
7
5
8
9
10
Fig. 26
Fig. 28
Front
2
1
3
4
5
Fig. 25
Front
Front
10
Fig. 27
11
12