WebDT 312 Operation Manual - Webdt 312
WebDT 312
OPERATION
Internal Battery Switch
To prevent battery drain during shipping and extended storage, the internal battery may
be turned off. To turn on the internal battery, push the battery button switch (on the back
panel) to the “up” position (see page 2 for photo). The internal battery pack has to be
turned on for it to operate, be charged, and for the optional external battery pack to
function.
Powering ON and OFF
To activate the WebDT 312, push and quickly release the Power Button to the left of the
front bezel. The display will come on in a few seconds. To put the WebDT 312 in Standby
mode, push and quickly release the Power Button. To turn the WebDT 312 off for
extended storage, power off the device safely using any software function that “shuts
down computer” provided in the software
operating system.
NOTE: The battery packs shipped with your device may be low in power—please use the
AC-DC adapter with the WebDT 312 when setting up the device for the first time to fully
charge the internal battery pack. You may charge the external battery pack with it
attached to the WebDT 312, or with the optional external battery charger kit.
NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and
the LED stays dark, the battery pack(s) may have been drained substantially. Try
unplugging/ replugging the AC-DC adapter to the WebDT 312 a few times to activate the
charging process.
NOTE: To conserve power, use (push and quick release) the Power Button to put the
device in “Standby” mode while not in use. Pushing briefly on the same button will wake
up the system within seconds.
NOTE: Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
device—this form of hardware shutdown is intended to be a means of recovery from
device lockups, and not as normal operation.
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the WebDT 312
The device may be configured using the utilities and methods dictated by the software
operating system. The WebDT 312 should be configurable for various properties such as
user profiles, network features, and several system elements.
Calibration
The touch display for the WebDT 312 is calibrated before shipping. In the event that the
calibration has been modified or is unsatisfactory, the respective calibration routines
(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.
Such applications are typically executed through touch input via Stylus or through mouse
click via a USB mouse.
ENGLISH
4
5
ENGLISH