WebDT 312 Operation Manual - Webdt 312
WebDT 312
Bluetooth
The WebDT 312 features a built-in Bluetooth adapter that operates on the Microsoft
Windows Bluetooth protocol. The Bluetooth configuration application is invoked from the
System Tray or from the Control Panel for Windows XP. Follow the instructions and
options provided within the application to configure and invoke Bluetooth connectivity
with the corresponding peripherals.
NOTE: Bluetooth devices or accessories that are not compatible with the Microsoft
Windows Bluetooth protocol may not work with the WebDT 312.
Button Management
Where supported by software, many of the hard buttons on the WebDT 312 are
programmable to perform a function of the user’s choice. The exception is the Power
Button and the SAS Button. To activate the button re-assignment application, invoke the
Button Agent application, e.g., in Windows XP Embedded.
Brightness Control
Where supported by device firmware and software, a hard button may be engaged to
manipulate the display brightness. Press the System Menu button (Button 7) on the front
of the WebDT 312. The System screen will display a Brightness control section with up
and down arrows that can be activated with the stylus.
Battery and Power Management
The WebDT 312 is equipped with an internal 2200mAh Li-Ion battery pack that is capable
of supporting approximately 1.5–2 hours of continuous operation. With the optional
internal 3760mAh battery and an external battery pack that clips (hot-pluggable) onto the
back of the device, the maximum period of continuous operation will be approximately
3–4 hours. The period between battery recharges can be significantly lengthened by
putting the device into Standby mode through the Power Button (see Buttons Function
Table) whenever the device is not in use. Depending on the operating software, the
WebDT 312 may also be configured to enter various power-saving modes via the Power
Button or through timed entry.
Desktop Cradle
The WebDT 312 is complemented by an optional Desktop Cradle for support, pass-through
charging, and connection to a range of USB peripherals, including keyboard and mouse.
The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, an Ethernet
port, a VGA port (optional) and USB ports. Always seat the WebDT 312 securely onto the
cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and USB ports
to function. The battery packs on the WebDT 312 may be recharged by connecting the
AC-DC adapter directly to the DC-in port on the WebDT 312 or through the DC-in port on
the Desktop Cradle while the WebDT 312 is docked to the Cradle.
USING THE WebDT 312
Memory configuration
The WebDT 312 is available with 1GB or 2GB memory configurations. Storage options
currently range from: 2GB to 16GB flash memory or 32GB to 64GB SSD.
Peripherals Support
Through its USB ports, the WebDT 312 supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, and system software recovery and updates. The WebDT 312 is also compatible
with custom mountable cradle options. These securable and mountable cradles provide
an interface to VESA mounts and arms, and to ports that may include USB, Ethernet, and
passthrough power.
Remote Management
Depending on software configuration, the WebDT 312 can be centrally managed for
asset monitoring and for software control. Please consult your device provider.
ENGLISH6
7 ENGLISH