WebDT 366 Basic Operation Manual

Summary of 366

  • Page 1

    Basic operation guide introduction thank you for acquiring the latest addition to dt research’s line of tablet devices—the webdt 366. Featuring a slim yet robust magnesium alloy enclosure, the sub-2lb webdt 366 with 8.4” tft display is powered by the amd geode™ gx 533 or geode lx 800 proces- sor, of...

  • Page 2

    Dc power input webdt 366 basic operation guide button functions (with windows xp embedded) button description action 1 power button push/release typically enters standby mode, or push/release exits standby mode or restarts device (software dependent) push and hold (over 4 seconds) invokes hardware s...

  • Page 3: The Webdt 366

    Www.Dtresearch.Com precautions 4 always exercise care when operating and handling the webdt 366. 4 do not apply excessive pressure to the display screen. 4 avoid touching the display screen directly with your fingers. You may damage the screen, and oil from your skin may be difficult to remove. Plea...

  • Page 4

    Note: avoid using the power button (“hold 4+ seconds” feature) to turn off the device—this form of hardware shutdown is intended to be a means of recovery from device lockups. Start up if the power up (from standby or otherwise) is successful, the appropriate interface will be displayed after a laun...

  • Page 5: Using The Webdt 366

    Programmable to perform a function of the user’s choice. The exception is the power button. To activate the button re-assign- ment application, invoke the button agent application, e.G., in windows xp embedded . Note: for windows ce, click on start –> settings –> control panel, then double click on ...

  • Page 6: Specifications

    Specifications display 8.4” hi-brite tft lcd with resistive touch and outdoor-viewable option display resolution 800 x 600 (svga) processor amd geode™ gx 533 or geode lx 800 memory (flash) 64mb – 8gb memory (ram) 256mb (gx); 512mb (lx) software operating systems windows ce; windows xp embedded; wind...