WebDT 366 Basic Operation Manual - page 2
DC Power
Input
WebDT 366 Basic Operation Guide
Button Functions (with Windows XP Embedded)
BUTTON
DESCRIPTION
ACTION
1
Power Button
Push/release typically enters Standby mode, or
Push/release exits Standby mode or restarts device
(software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
2
First of four
Programmable, Launch soft (on-screen) keyboard (Default)
3
Second of four
Programmable, Launch Internet browser (Default)
4
Third of four
Programmable, Combine with buttons 6-9 to control brightness
5
Fourth of four
Programmable
6
Left edge of button
Programmable, Arrow Left (Default) or Enter.
In combination with Button 4 = Screen off
7
Right edge of button
Programmable, Arrow Right (Default) or Enter.
In combination with Button 4 = Brightest
8
Upper edge of button Programmable, Arrow Up (Default) or Enter.
In combination with Button 4 = Brightness up
9
Lower edge of button
Programmable, Arrow Down (Default) or Enter.
In combination with Button 4 = Brightness down
Record Button
Programmable (Default: Launch Recorder application)
Note: Buttons 2–10 may be re-programmed through a Button Agent utility.
Toadjustbrightness: Use combination of button 4 (press and hold) and buttons 6 to 9.
The WebDT 366 (withWindowsXPEmbedded)
Antenna/PC
Card Slot
Microphone
Battery/Power LED
Network LED
CompactFlash
Card Slot
1
Power
Button
USB
Port
Desktop
Cradle
Two USB Ports on Cradle
(behind cover)
Headset
Jack
Record
Button
Stylus
Button Management
Calibration
Wireless Network Settings
2 3 4 5
6 7
8
9
Battery and Power Meter