WebDT 515A Basic Operation Manual
Integrated LCD Systems
ENGLISH
BASIC OPERATION GUIDE
WebDT Integrated LCD Systems
ENGLISH
4
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2011, DT Research, Inc. All Rights Reserved. DT Research and WebDT are registered trademarks of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the WebDT Integrated LCD System, a 15-inch/ 17-inch/ 21.5-inch TFT
display-integrated, thin computing platform, offering adaptability to mounting configurations and
applications, including information appliance, thin client for server computing, and disk drive-
equipped options.
Please take a few moments to review the contents of this document to ensure that the setup and
startup proceed smoothly. The WebDT Integrated LCD System is ready for use, out of the box, in its
default configuration when powered by the power source provided. The following discussion offers
guidance on the hardware elements and features of the WebDT Integrated LCD System. Please refer
to your device provider for information pertaining to the software operating system or software
applications.
Package Contents
O
• ne WebDT Integrated LCD System
A
• C/DC power adapter with power cord
B
• asic operation guide
Precautions
Always exercise care when operating and handling the WebDT Integrated LCD System.
•
Never disassemble any portion of the enclosure, as this will void any product warranty on the
•
WebDT Integrated LCD System.
Do not use any AC/DC adapter other than the one provided with the device or a replacement
•
acquired from the manufacturer.
I
• n the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power
down the WebDT Integrated LCD System and disconnect all power sources. Please report the
problem to your device provider immediately.
BOG081711ILENG
Mounting
The WebDT Integrated LCD System is designed to be secured to VESA-compliant mounting arms or
stands. This is accomplished by equiping the standard metal base on the rear of the display unit.
The VESA-compliant mounting holes at the rear of the device will mate with VESA mounts or arms
to meet the requirements of the deployment.
Remove the detachable base by pressing
1.
upward to remove the cover, then unscrewing
the four screws attaching the base to the
display.
Attach the new VESA-compliant mounting
3.
device or stand to the display.
The display without the base.
2.
The display successfully mounted on a
4.
VESA-compliant mounting arm.