WebDT 515A Basic Operation Manual - page 2
I/O Panels & Function Buttons
The WebDT Integrated LCD System has a comprehensive set of I/O ports. The following ports are
located along the lower rear edge of the display unit.
Side Panel Function Buttons
The side panel of the WebDT Integrated LCD System features power, and programmable buttons.
Two USB 2.0 ports
1.
COM ports
2.
Audio-out jack
3.
Microphone-in jack
4.
Line-in jack
5.
Ethernet port (RJ45)
6.
18.5V/ 3.5A DC-in jack
7.
Two USB 2.0 ports
8.
Two USB 2.0 ports
1.
COM ports
2.
Audio-out jack
3.
Microphone-in jack
4.
Two USB 2.0 ports
5.
Ethernet port (RJ45)
6.
18.5V/ 3.5A DC-in jack
7.
WebDT Integrated LCD Systems
ENGLISH
2
3
ENGLISH
Packaging
The WebDT
•
Integrated LCD System is packaged with recyclable materials and
designed for maximum protection in transportation and handling.
When possible, please save the packaging carton and protective inserts for
•
re-use if there is ever a need to ship the WebDT Integrated LCD System.
Cleaning the anti-microbial enclosure
(WebDT 517MD/ 522MD)
Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
•
If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended.
•
To prevent scratching the anti-microbial coating, please wipe gently.
•
Button
Description
9. Programmable
The four buttons are intended to be user programmable via software in
applicable operating systems.
10. Power
M
• ay be configured to perform different functions, depending on the
software operating system.
D
• epending on the OS, a brief, firm push will trigger software-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart or
to exit Standby mode.
P
• ush and hold for over 4 seconds to forcefully shut down the device. This
method of powering off should only be used when proper shutdown
through software is not possible.
Button
Description
8. Programmable
The three buttons are intended to be user programmable via software in
applicable operating systems.
9. Power
M
• ay be configured to perform different functions, depending on the
software operating system.
D
• epending on the OS, a brief, firm push will trigger software-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart or
to exit Standby mode.
P
• ush and hold for over 4 seconds to forcefully shut down the device. This
method of powering off should only be used when proper shutdown
through software is not possible.
1
1
2
2
3
3
4
4
5
5
7
7
8
9
8
9
10
6
6
WebDT 515/ 517/ 522
WebDT 515A/ 517A/ 522A/ 517MD/ 522MD
Options
The WebDT Integrated LCD System has a number of optional configurations in both software and
hardware. These include:
SSD or HDD storage
1.
IR touch screen display
2.
Magnetic card reader
3.
Presence sensor and scanner auto detection
4.
Built-in 802.11a/b/g/n WLAN module
5.
Smart card reader; supports ISO 7816 T=0, T=1
6.
smart card, 3V/ 5V smart card and memory card