1. DL manuals
  2. Webee
  3. Wireless Router
  4. ADSL Wireless N Router
  5. Installation Manual

Webee ADSL Wireless N Router Installation Manual

Summary of ADSL Wireless N Router

  • Page 1

    Installation guide v.1.5 adsl wireless n router 1 front panel and side panel wifi button to enable or disable your wireless network, press the wifi button on the side panel. The wireless function is set by default. 2 back panel and on/off button pwr green power on lan 1,2,3 green on: lan link connec...

  • Page 2

    3 connect router to the internet a. Connect the router to your broadband internet connection. I. To connect via adsl, see 3.1 ii. To connect via ethernet, see 3.2 iii. To connect 3g usb modem, see 7. B. Connect power adapter to the router’s power connector, then plug it into the power wall outlet. C...

  • Page 3

    3.3 connect pc to the router a. Plug network cable to the ethernet port of your pc (rj-45), and then to the lan port of the router. B. Start the computer. Check led is green and indicating pc connected. 4 wireless network (wifi) the wireless lan and wireless security are preconfigured in the router....

  • Page 4

    6 operators’ adsl settings if inet is not on after dsl connected, check the vpi/vci identifiers from your operator. If needed, configure new vpi/vci identifiers in the router as shown below. Log on to the user interface (5). A. Open advanced setup menu, and select layer2 interface . Click atm interf...

  • Page 5

    C. Select wan service , and then click add . D. Select the configuration. (example is showing vpi as 0 and vci as 35.) click next . E. Select ip over ethernet , and then click next . F. Check enable nat , enable firewall , enable igmp multicast , and click next ..

  • Page 6

    G. Click on the right side menu information, and then move the information to the left side menu by clicking the arrow button pointing to the left. Click next . A new window will open. H. In the same way, move the information in dns server configuration to the left side menu. Click next. I. Click ap...

  • Page 7

    7 connect 3g usb-modem to the router if router’s dsl port or wan port is connected, unplug the cable. Note! Undo request for pin on your sim card. Connect usb modem to the router’s usb port. Log on to the user interface (5). A. Open advanced setup menu and select layer2 interface and 3g interface . ...

  • Page 8

    8 printer server installations connect printer cable to the router’s usb port. Log on to the user interface (5). A. Click advanced setup Æ print server and then check enable . Type the printer name (and make and model). B. Click apply/save . C. In the windows menu, click control panel Æ printers and...

  • Page 9

    9 storage service connect usb storage device to the router’s usb port. Log on to the user interface (5). A. Open advanced setup menu and select storage service . In table you can see the storage device information. B. Select user accounts . Click add . C. Enter your user name and password. Please, d...

  • Page 10

    E. In samba server check enable samba server . Click apply . F. In the windows menu click start Æ run . In open use \\192.168.1.1 . Click ok . G. Type your user name and password in the login interface. H. You will now access the usb storage device. The folder name is user name. 10 reset button and ...