Weber Motor MPE 850 SNO NA Service Manual - page 12
12
SHB MPE850 Rev 1.2 | 404753 |
3.3 Fuel
3.4
Engine oil
Engine damage and loss of power caused by fuel with an insufficient
octane rating.
Fuel with an insufficient octane rating causes knocking during combustion.
Which results in excessive loads and damage to the crank drive within a
short time.
►
Always use fuel with the recommended octane rating.
Information!
Weber Motor recommends you always keep a supply of engine oil to hand. Consult
your local vehicle dealer.
Engine damage due to incorrect engine oil grade or viscosity.
An incorrect engine oil grade or viscosity causes excessive wear and
moving parts may start to seize up.
►
Always use the recommended engine oil.
►
Do not mix engine oils of different grades or degrees of viscosity.
unleaded gasoline („regular unleaded“), with an octane rating of at least
91 ROZ or 82,5 MOZ
USA: at least Regular 87, unleaded
Fuel quality
0W 40 completely synthetic, at least API SJ, ACEA A3/B3
See the vehicle manufacturer‘s documentation.
Engine oil
Fill quantity
3 Description
3.3 Fuel | 3.4 Engine oil