Weber Motor MPE 850 SNO NA Service Manual - page 13
13
SHB MPE850 Rev 1.2 | 404753 |
3.5 Coolant
Freezing, overheating or corrosion due to incorrect mixing ratio or
unauthorized coolant additives.
An incorrect mixing ratio reduces the cooling capacity.
Combining different coolant additives may trigger a chemical reaction and
they may lose their effectiveness.
►
Use the same coolant throughout the year in the mixing ratio
specified.
►
When topping up the coolant, do not change the mixing ratio.
►
Always use approved coolant additives when topping up the
coolant.
Information!
Weber Motor recommends you always keep an adequate supply of ready mixed
coolant to hand. Consult your local vehicle dealer.
Coolant additive based on ethylene glycol, silicate- and nitrite- free,
suitable for aluminium engines
40 % water + 60 % coolant additive
See the vehicle manufacturer‘s documentation.
BASF Glysantin G 30
Chevron Havoline Extended Life Coolant XLC+B
Valvoline Zerex G 30
Coolant additive
Mixing ratio
Fill quantity
Approved coolant additives
3 Description
3.5 Coolant