Weber PLATINUM 2200 NG User Manual - Check For Gas Leaks

14

CHECK FOR GAS LEAKS

Figure 26

(a)

(b)

(c)

(d)

(e)

View from below

(f)

WARNING: Do not ignite burners while checking 

for leaks.

Check for leaks by wetting the connections with the soap

and water solution and watching for bubbles. If bubbles

form or if a bubble grows there is a leak.

Check:

a) Hose to manifold connection. Figure 26 (a).

WARNING: If there is a leak at connection a, retighten

the fitting with a wrench and recheck for leaks with

soap and water solution.

If a leak persists after retightening the fitting, turn

OFF the gas. DO NOT OPERATE THE BARBECUE.

Contact your dealer.

b)  Manifold to side burner hose connection. 

Figure 26 (b).

c)

Valves to manifold connections. Figure 26 (c).

d) Hose to quick disconnect connection. Figure 26 (d).

e) Side burner supply line to side burner orifice

connection. Figure 26 (e).

f)

Side burner hose to side burner valve, and side

burner supply line to side burner valve. Figure 26 (f).

WARNING: If there is a leak at connections 

b, c, d, e or f, turn OFF the gas. DO NOT OPERATE

THE BARBECUE. Contact your dealer.

When leak checks are complete, turn gas supply OFF at

the source and rinse connections with water.