Weber RANCH KETTLE 39950 User Manual - page 8
8
INSTALL BOWL ASSEMBLY
You will need: Bowl assembly, four 5/16-18 x 7/8 inch bolts, four 5/16 inch steel washers, four 7/8
inch aluminum washers, four 5/16-18 hex nuts, four 5/16 inch
lock washers, 1/2 inch open-end or an adjustable wrench and pliers.
Set bowl in frame. Place a steel washer
(1)
on bolt
(2)
and insert through frame assembly and bowl.
Place aluminum washer
(3)
, lock washer
(4)
and hex nut
(5)
on bolt and tighten. Install the other
bolts in locations shown.
INSTALL LID TABS
You will need: Two lid tabs, two 5/16-18 x 7/8 inch bolts, two 7/8 inch aluminum washers, two
5/16-18 hex nuts, two 5/16 inch lock washers, 1/2 inch open-end or an adjustable wrench and
pliers.
Insert bolt
(1)
through lid tab
(2)
, frame assembly and bowl on outside of caster legs. Place
aluminum washer
(3)
, lock washer
(4)
, then hex nut
(5)
on bolt and tighten.
6
7
(1)
(2)
(3)
(4)
(5)
(5)
(4)
(3)
(2)
(1)
ASSEMBLY